医用洗片机
1、软片最宽:360mm 2、软片最短:100mm 1、Film size(max):360mm 2、Film size(min):100mm
3、显影时间:30S 37.5S 45s 可调 3、Developing time :30S 37.5S 45 varied 3point at option
4、药液温度:28-37℃可调 4、Solution temparture :28℃-37℃ at option
5、烘干温度:≤60℃ 5、Hot time:≤ 60℃
6、冲片量:100张/小时(14”×17”) 6、Sault tablets of:100/hour (14”×17”)
7、药槽容量:5L 8、药液循环:8L/min 7、Channel volume:5L 8、Solution circle:8L/min
9、干进干出时间:120s 150s 180s三档调节 9、Dry films from from entering to outing:120s 150s180s 3point at option
10、药液补充:80ml 10、Solution supply: 80ml
11、外包尺寸:950× 730× 1240(mm) 11、Packing:950× 730× 1240(mm)
12、净重:70kgs 毛重:105kgs 12、Net weight:70kgs Gross weight:105kgs
13、电源:220V/50Hz 13、Power source:220v/50Hz
14、功率:1.8kw 14、Power:1.8kw
智能化电脑控制系统
深槽式滚轴输片系统
可靠的进片检测系统
故障自检报警系统
节能和自动停机系统
水洗自动控制系统
抗氧化、防结晶系统
药液过滤系统
自动补液系统
数字显示键盘人机对话方式,可选择标准和非标准冲洗工艺,各药槽温度可独立调节,控温精度≤±0.3℃
冲洗速度可自由调节控制,并具有超温报警和自动切断电源功能。
装药量大,费用低,送片冲洗平衡、可靠
本机采用我厂自行研制的进片检测系统,其进片检测更可靠、实用。
机器若出现故障能自动显示、报警。
不连续进片自动切断主电板的节能装置:软片冲洗结束后,加热器延时2分钟停止加热,风机延时4分钟关闭
同时马达自动停止转动,机器进入节能状态,烘干系统采用先进的热源体,热效率高,因此能耗低。
机器工作即自动进水,停机则不进水,有效节约用水。
在预备和待机状态时机器自动清洗滚轴,防止结晶出现。
药液自动循环过滤,保证冲洗质量
自动进片补充及液面补充同时独立操作。
itellingent computer controlled system
Deep tank roller film entering system
Credible entering films checking system
Give an alarm automatically system
Saving and stopping auto system
Water developing controlled auto system
Anti-ox,anti-crystal system
Filtrate solution system
Supply solution auto
Digital display, keyset man-machine conversation, can choose standard and nonstandard
developing method,every solutions temp can be used alone, controlling precision ≤±0.3℃.
Developing speed can be controlled at option.When the temp is too hot,the machine can
give the alarm and shut the power automatically.
Install plentiful solution,low fees,filmsentering system is credible,balanced
The machine is used the advanced films enteringchecking systems which is developed by
ourselves, the films entering checking is very credible and applied.
When the machine meets the trebles, it will display and give an alarm auto .
Stop films the machine will cut the saving system auto, finish the entering films,the
heated will delay 2 min then stop heating, fan will delay 4 min then shut, meanwhile,the
motor will stop moving auto, the machine will be in the saving system,hot system is used
by the advanced heater, which have high efficient,so can be saved the electrical.
When the machine is working ,it will be in the entering water system auto, after stop
working , it won’t enter the water; it can be saved the water.
When the machine is starting , it will clean the rollers atuo.
Solutions are filtrated auto to auarantee the developing films quality.
Supply the films auto, supply timely and supply the solutions is alone.
FACTORY WILL RENEW THE MACHINE,IF THERE ARE ANY DIFFERENCES,PLEASE SEE THE MACHINE
产品更多信息